1. BACKSTG
  2. Tools
  3. Loudness by platform: how much they turn your master down
Free tool

Loudness by platform: how much they turn your master down

Enter your master's integrated loudness and see how much each platform turns it down (or up). Below you find the values table with a source for each one.

LUFS
dBTP

Read both values on your DAW's loudness meter or a plugin (integrated LUFS and true peak), measured over the whole track.

What each platform does to your master

    Indicative values checked on September 30, 2026 against the sources listed below. Platforms may change them and listeners can turn normalization off.

    How to use it

    1. Measure your master with your DAW's loudness meter or a free plugin: you need the integrated loudness (over the whole track, in LUFS) and the true peak (in dBTP).
    2. Enter the values in the two fields. True peak is optional, but it tells you how much Spotify can raise a master that is quieter than the reference.
    3. Read the result. For each platform you see whether the track is turned down, left as is or turned up, and by how many dB.

    Example: a master at -9 LUFS is turned down by 5 dB on Spotify and plays at -14 LUFS. Perceived volume is the same as other tracks: being louder does not make your track sound louder, only more compressed.

    Values by platform

    Indicative values, checked on September 30, 2026. Where a platform does not publish a number we say so, and the value shown is the one most often measured and reported by mastering engineers.

    PlatformReference loudnessRecommended true peakSource
    Spotify-14 LUFS (Loud -11, Quiet -19)-1 dBTP, -2 dBTP if the master is louder than -14 LUFSSpotify for Artists, official
    Apple Musicabout -16 LUFS (not published)-1 dBTPApple Digital Masters, official: describes Sound Check, with no LUFS value
    YouTubeabout -14 LUFS (not published)-1 dBTPYouTube Help, official: stable volume is off for music and official music videos
    Amazon Musicabout -14 LUFS (not published)-2 dBTP (reported)Amazon Help, official: the normalization setting exists, with no value
    TikTok and Instagramno published value-1 dBTP (to be safe)No official source available
    SoundCloud-14 LUFS-1 dBTP, -2 dBTP if the master is louder than -14 LUFSSoundCloud Help, official

    Keep in mind that listeners can turn normalization off, and that on YouTube, TikTok and Instagram your track often plays inside a video with other audio.

    What LUFS and true peak mean

    • LUFS (Loudness Units relative to Full Scale) measures perceived loudness, not peaks. Integrated loudness is the average over the whole track, following the ITU-R BS.1770 standard that Spotify also uses.
    • True peak is the real peak of the signal after conversion to analog, which can go above 0 even when your DAW shows no clipping. Platforms convert your track to lossy formats (Ogg, AAC): a true peak that is too high turns into distortion in that conversion.

    So how loud should I master?

    You don't need to chase an exact number. Many engineers master to the right loudness for the genre and make sure true peak stays below -1 dBTP. If your master is much louder than the reference it will be turned down and only lose dynamics. If it is quieter, on some platforms it will stay quieter than other tracks.

    If you mix and master remotely, the guide on online mixing and mastering explains how to work with your engineer. For client deliveries, read how to send a mix without WeTransfer.

    FAQ

    Does Spotify turn down loud tracks?

    Yes. On the normal setting Spotify brings tracks to -14 LUFS: a master at -8 LUFS is turned down by 6 dB. Spotify says so in its guide for artists.

    Does Spotify turn up quiet tracks?

    Yes, but only while the true peak stays below -1 dBTP. A track at -20 LUFS with a true peak of -5 dBTP is raised by 4 dB, to -16 LUFS, not to -14.

    Why do Apple Music, YouTube and Amazon show an "about" value?

    Because these platforms do not publish a LUFS value: the number shown is the one mastering engineers measure most often. The tool marks it as an unofficial value.

    Do I need a different master for each platform?

    Usually not. A master with true peak below -1 dBTP works everywhere; each platform's normalization takes care of volume differences.